Connectors; Floppy Disk Drive Connector: Fdd1; Fan Power Connectors: Cpu_Fan1/ Sys_Fan1 - MSI MS-7174 Manual

Table of Contents

Advertisement

M S-7174 M -ATX M ainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
and USB Ports.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CPU_FAN/ SYS_FAN1
The CPU_FAN1 (processor fan) and SYS_FAN1 support system cooling fan
with +12V. W hen connecting the wire to the connectors, always take note that the
red wire is the positive and should be connected to the +12V, the black wire is
Ground and should be connected to GND. If the mainboard has a System Hardware
Monitor chipset on-board, you must use a specially designed fan with speed sensor
to take advantage of the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPU_FAN supports the fan control.
3. Please refer to the recommended CPU fans at Intel
website.
2-14

Connectors

GND
+12V
SENSOR
Control
CPU_ FAN
FDD1
GND
+12V
SENSOR
SYS_FAN1
®
official

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents