Tool Storage - Panasonic MC-V225 Operating Instructions Manual

Wand
Tube
Tubo
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Wand
Tube
Tubo
Raised Tab
Saillie
Lengüeta levantada

Tool Storage

Crevice Tool
Suceur plat
Herramienta
para hendiduras
"J" Slot
Fente en "J"
Ranura en "J"
Hose
Tuyau
Manguera
➢ ➢ Some tools may already be stored on
vacuum cleaner.
➢ ➢ Place hose in front of handle on hose
holder.
➢ ➢ Attach wand to hose by aligning the
two (2) raised tabs on wand with "J"
slots in hose, guide tabs along
grooves, twist to lock in place.
➢ ➢ Place wand in middle slot of tool
holder, twisting and pushing down
over short hose to assure a good
connection.
➢ ➢ Store dusting brush in round front
slot of tool holder.
➢ ➢ Place crevice tool into rectangular
rear slot of tool holder.
➢ ➢ Refer to PARTS IDENTIFICATION
section for tool location.
- 16 -