Cleaning Agitator; Replacing Agitator; Agitator Assembly - Panasonic MC-V225 Operating Instructions Manual

Card
Carte
Tarjeta
Washer
End Cap

Cleaning Agitator

Replacing Agitator

Agitator Assembly

Brush Unit
Belt Pulley
- 32 -
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.
➢ ➢ When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢ ➢ Remove lower plate and agitator.
➢ ➢ Position belt over belt pulley on the
new brush unit.
➢ ➢ Reinstall agitator and lower plate.
Washer
End Cap