Removing And Installing Lower Plate; Replacing Headlight Bulb - Panasonic MC-V225 Operating Instructions Manual

Panasonic commercial vacumm cleaner operating instructions mc-v225
Hide thumbs Also See for MC-V225:
Table of Contents

Advertisement

WARNING
Disconnect the electrical supply before servicing or cleaning the unit.
Failure to do so could result in electrical shock or personal injury from
cleaner suddenly starting.
Latches
Taquets
Lengüetas
Rear Belt
Cover
Couvre-
courroie
arrière
Cubierta de
la correa
trasera
Lower Plate
Plaque inférieure
Base inferior
Electrical Shock or Personal Injury Hazard

Removing and Installing Lower Plate

➢ ➢ Always place paper under nozzle
whenever lower plate is removed to
protect floor.
➢ ➢ Place handle in upright position and
turn vacuum over to expose lower
plate.
➢ ➢ Release lower plate by pressing two
(2) latches inward as shown.
➢ ➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ ➢ Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
➢ ➢ Make sure all wires are routed
properly and not pinched.
➢ ➢ Press lower plate into place then
push two (2) latches outward.
- 28 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents