Table of Contents
Advertisement
3.
The Format Memory Card SET appears on the center of the LCD.
Press the Up/Down button to select "Yes" to format, "Cancel" to exit.
4.
5.
Press the SET button to confirm.
6.
Once the SD card is formatted all the images sitting on the card will be erased and the camera will
revert to the video standby mode.
Firmware v1.0.12
You can restore your camera to the original factory settings.
1.
Press the SET button.
2.
Press the Left/Right button to select the
3.
The Firmware SET appears in the center of the LCD.
4.
Press the SET button to confirm and reset the camera to the original factory settings
Playback Mode
Press the MODE button to enter the Playback mode.
When the
icon appears on the top left corner of the LCD screen this indicates that you are in
Playback mode.
Here you can preview the photos and videos you have captured and recorded. In Playback mode you can
icon.
39
Advertisement
Table of Contents
