Video Mode - Vivitar VF332-GRP-TA User Manual

1. Press the SET button.
2. Press the Left/Right button to select the
3. The Format Memory Card SET appears on the center of the LCD.
Press the Up/Down button to select "Yes" to format, "Cancel" to exit.
4.
5.
Press the SET button to confirm.
6.
Once the SD card is formatted all the images sitting on the card will be erased and the camera will
revert to the camera standby mode.
Firmware v1.0.12
You can restore your camera to the original factory settings.
1.
Press the SET button.
2.
Press the Left/Right button to select the
3. The Firmware SET appears in the center of the LCD.
4. Press the SET button to confirm and reset the camera to the original factory settings

Video Mode

Press the MODE button to select the Video mode.
Note: You must insert a SD memory card for shooting videos.
icon
icon.
28