Vivitar VF332-GRP-TA User Manual page 24

6. The LCD screen will be adjusted as per the Image Sharpness option you selected.
Light Exposure
This setting allows you to control the brightness of your images.
1. Press the SET button.
2. Press the Left/Right buttons to select the
3. The Light Exposure SET appeas in the center of the LCD
4. Press the Up/Down buttons to select an Light Exposure value (from 3 brightest to -3 darkest) from the
SET that appears.
5. Press the SET button to confirm, save and Press MODE button to exit to the camera standby mode.
6. The Light Exposure icon for the option you selected appears on the bottom of the LCD.
ISO
This is a special function that allows you to compensate the light conditions when the light source is not good
and you also specifically do not wish to use a flash or tripod. When using ISO sensitization, please choose
the low value ISO to prevent spots or blotches appearing on your photo.
1.
Press the SET button.
2.
Press the Left/Right buttons to select the
3.
The ISO SET appeas in the center of the LCD
icon.
icon
23