Vivitar VF332-GRP-TA User Manual page 27

5. Press the SET button to confirm, save the changes and Press MODE button to exit.
Silent Mode
This is for you to set the beep emitting or not when you operate your camera.
1. Press the SET button.,
2. Press the Left/Right button to select the
3. The Silent Mode SET appeas in the center of the LCD
4. Press the Up/Down button to select Silent Mode Yes or No.
5. Press the SET button to confirm and Press MODE button to exit the SET .
Auto Power Off
By default, if your camera is idle for 60 seconds it will automatically be powered off. Use the Auto Power Off
option to change this setting:
1. Press the SET button.
2. Press the Left/Right button to select the
3.
Press the Up/Down buttons to select an Auto Power Off option from the SET that appears:60
seconds/180 seconds/5 minutes/Disable
4.
Press the Up/Down button to select a time that the camera will automatically power off if inactive.
5.
Press the SET button to confirm, save and Press MODE button to exit to the camera standby mode.
icon.
icon
26