General Operation - Caslon Zip21A Operation And Maintenance Manual

Initial Machine Assembly
Remove both pieces from packaging and store for safe keeping.
Place the top unit onto the lower base and locate the rubber feet from the top unit into the
holes in the top of the base unit..

General Operation

Make sure that the Waste Collection Box, Delivery Dividers, Feed Tray and guards are all
properly installed on the Zip21A before operation.
The top guard MUST be closed properly or the safety switch will not be activated.
The main power switch, located at the delivery end/non-operator side of the machine, is used to
turn the Zip21A "ON". Once power has been turned on, the Zip21A will go through a self-test
sequence.
At the end of this self-test, the Zip21A will be ready to operate. The last set of program
parameters that were programmed into the Zip21A will automatically be recovered from
memory and displayed on the touch screen.
Pressing the "START" button will activate the Zip21A and the machine will start feeding paper.
When the machine has finished feeding all of the stock and the feed tray is empty, it will stop
automatically. Likewise, if a Run Count is set the machine will feed the correct number of sheets
and then automatically stop.
Pressing the "STOP" button will deactivate the feeding system of the machine and complete the
sheet currently being processed.
If an error occurs, the Zip21A will sound a warning and stop the machine. An error message
should be displayed on the touch screen display. Note the error message and refer to the
"Errors" section. To clear the error, follow the procedure indicated until the machine returns to
operation. The Zip21A will not operate until the error message has been cleared.
Page 5