Caslon Zip21A Operation And Maintenance Manual page 12

Touch Screen Operator Controls
The Start button will initiate the machine operation and sheet feeding and cutting will
commence.
The Single Sheet button will initiate the machine operation, feeding and cutting one single
sheet and then stopping. This is very useful when testing or setting the machine.
The Pause button will stop the feeder and the machine at the point the button was pressed.
When the Pause is pressed again, the machine will continue from the point it was paused.
The Stop button will stop the feeder and the machine will complete the sheet that is currently
being processed. Once this sheet is complete, the machine will stop.
The Reset button will initiate the start up cycle of the machine. It runs all drives, motors and
tests all sensors and signals. If everything is correct, the machine will then return to the stop
position.
The Manual button will open a new screen which allows control of the individual motors on the
machine and other functions described on page 12 of this manual.
This indicates the total number of sheets that have been run since Zero was last pressed.
The Zero button will reset the Total Run count back to zero.
This indicates the number of sheets required in the current batch. Pressing the display value
allows the batch quantity to be changed.
The Cutting Data button is used to access the jobs that are stored in memory for recall, editing
or programming a new job.
This button accesses the alarm list that has been stored on the system. This list shows which
error messages and faults have been detected and displayed in chronological order.
This button accesses a visual image of the machine sensors and there current operating status.
Activating any of the sensors will show a status change on this display.
Page 11