System Setup Options - Honeywell RTH7500 Series Quick Installation Manual

Quick Installation Guide
System Setup
22
Select System Setup options.
Press + or - to change values or
select from available options. Then
press Select to save changes and
advance to the next System Setup
number.
See "System Setup options" below
for a full list of System Setup
numbers and options .
Repeat until all of the System
Setup options have been set. The
thermostat will automatically save
and exit to the Home screen.
23
Continue to "System operation
settings" on page 10.

System Setup options

Number Description
120 Scheduling Options
125 Temperature Indication Scale
200 Heating System Type
205 Heating Equipment Type
Options (factory default in bold)
0 = Non-Programmable
1 = 1-Week Programmable
2 = 5-2 Programmable
4 = 7-Day Programmable
Note: You can change default MO-FR, SA-SU schedule here. To edit
periods during days, temperature setpoints, or to turn Schedule On/Off,
touch MENU and go to SCHEDULE.
0 = Fahrenheit
1 = Celsius
1 = Conventional Forced Air Heat
2 = Heat Pump
3= Radiant Heat (Boiler)
5 = None (Cool Only)
Note: This option selects the basic system type your thermostat will
control.
Conventional Forced Air Heat:
1 = Standard Efficiency Gas Forced Air
2 = High Efficiency Gas Forced Air
3 = Oil Forced Air
4 = Electric Forced Air
5 = Hot Water Fan Coil
Heat Pump:
7 = Air to Air Heat Pump
Radiant Heat:
9 = Hot Water Radiant Heat
12 = Steam
Note: This option selects the equipment type your thermostat will
control. Note: This feature is NOT displayed if feature 200 is set to Cool
Only.
8