Changing System Setup - Honeywell Smart Series User Manual

Setting advanced preferences
Advanced Preferences Options (concluded)
Screen Title
Early Recovery for
Early Recovery for
Temperature Limits
Keypad Lockout
Clock Format
Daylight Saving Time
Indoor Display Offsets
* Early recovery only available when configured for business. If configured for Home, see "Smart Response Technology"
on page 25.

Changing system setup

If your needs change, you can change the
basic system settings you chose during
thermostat installation (page 9).
1 Touch SETTINGS. The thermostat
displays a list of options.
2 Select System Setup. The thermostat
displays the first screen of options that
you can change.
3 On each screen, make changes as
needed then touch
new options. Repeat this step until
you have made all changes. Table on
page 29 explain the System Setup
screens and options.
4 When you have made all changes,
press Done to save and exit.
69-2715EF—07
Settings and Options (Options vary depending on setup.)
Select No to begin recovery on schedule or Yes to ramp up
Heating*
temperature early.
Select No to begin recovery on schedule or Yes to ramp down
Cooling*
temperature early.
Select the Minimum Cool and Maximum Heat Limit.
Select Unlocked/Partially Locked/Locked.
Select 12 Hour or 24 Hour.
Select Off or On. If set to On, the system will automatically
change time/date to account for daylight saving.
Select the number of degrees to offset indoor temperature or
percentage to offset indoor humidity.
Next
to display
28
System Setup
Touch the Help button
to see information
about screen options.
SETTINGS
Next