Step 2A. Connection To Rgb Monitor - Panasonic TU-HDS20 Operating Instructions Manual

Step 2a. HDTV Digital Receiver Connection to RGB Monitor
Follow this diagram when connecting the HDTV Digital Receiver to a Monitor with
RGB INPUTS.
RF OUT
SATELLITE
IN
CH 3
ANT IN
CH 4
MODEL NO.
SERIAL NO.
AC 120V 60Hz
MAX AMPS
MANUFACTURED
Terrestrial or
Cable Antenna
HDTV DIGITAL RECEIVER CONNECTION TO RGB MONITOR
Procedure
•
•
•
•
•
Note:
H
AUDIO
R L
R-AUDIO-L
RGB/YP P
B R
H-SYNC-L
DIGITAL OUTPUT
Connect video cables from the RGB output of the HDTV Digital Receiver to the RGB inputs
of your Monitor.
Connect the H,V output cables from HDTV Digital Receiver to the H,V inputs of your
Monitor.
Set the RGB/YP P switch to the RGB position.
B R
Connect the audio cables from the left and right digital audio output jacks on the HDTV
Digital Receiver to the left and right digital audio jacks on the RGB monitor.
Select the HDTV Digital Receiver video output according to the capability of your RGB
monitor (Hybrid, Native, 1080i or 720i).
Modem should also be connected to a telephone jack using the supplied modem cable
if impulse pay per view services are desired.
RGB MONITOR
RGB INPUTS
V R G B
HDTV DIGITAL RECEIVER
P Y
P
R B
R B G
R-AUDIO-L VIDEO S-VIDEO
DIGITAL
AUDIO OUT
NTSC OUTPUT
G
ETTING
NOTE: RGB cables not
included.
®
HDTV DIGITAL RECEIVER
WARNING
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TEL LINE
ASSEMBLED IN MEXICO
(AC-3)
S
TARTED
DISTRIBUTED BY
MATSUSHITA ELECTRIC
CORPORATION OF AMERICA
ONE PANASONIC WAY,
SECAUCUS, NEW JERSEY 07094
29