Aspect Ratio Selection - Panasonic TU-HDS20 Operating Instructions Manual

HD D TV D
IGITAL ISPLAY

Aspect Ratio Selection

The HDTV Digital Receiver allows you to select an aspect ratio (picture display shape)
to match the source signal and shape of your TV screen. You can also change the
aspect ratio for your personal viewing preference. To select an aspect ratio, press the
ASPECT button on your remote control and the HDTV Digital Receiver will cycle to
the next available aspect ratio choice. The following table shows the available aspect
ratios.
Full Aspect
16:9 or 4:3 picture will be displayed in the center of the viewing screen at full screen
width and height.
Zoom Aspect (4:3 Monitor receiving 16:9 source signal)
The picture will be expanded uniformly (width and height) to fill the viewing screen.
The picture will be cropped, either horizontally or vertically to fit the viewing screen.
The cropped portion of the original picture will be lost from view.
Note:
Letterbox Aspect
Video formats with aspect ratios greater than 16:9 will be displayed at the proper
width, so no video information is lost. Bars will appear above and below the picture.
Sidebar Aspect
4:3 pictures will be viewed on a wide aspect TV screen with vertical bars on both sides
of the picture.
Note:
16
F
ORMATS
Source Signal
16:9
4:3
To properly view Closed Captioning, the HDTV Digital Receiver may, in some cases,
change the aspect ratio from Zoom to Full.
See following page for illustrations of the various aspect ratios.
Monitor Format
16:9
Full (No Scaling)
Full - Sidebar
4:3
Full - Zoom - Letterbox
Full (No Scaling)