System Test - Panasonic TU-HDS20 Operating Instructions Manual

R G M
OLLER UIDE ENU
Setup : System Test
The System Test menu allows you to invoke a system test which perform a check of
the following subsystems.
The following screens show the system test screen and the system test in progress.
K
Sat Setup
Guide Setup
K
Ant Setup
Monitor

System Test

Access Card
Press K to start system test.
System Test Screen
Procedure
H
H
H
H
72
O
PERATIONS
Component Requirement
Signal Test This tests the signal strength.
This attempts to tune to an
Tuning Test
known frequency.
This
Phone Test
operational status.
This checks the Access Card
Access Test
function.
Card ID Card is installed in TU-HDS20
Note: System test is only available for Satellite input.
Start
Signal Test
Tuning Test
Phone Test
Access Test
Card ID 000077196681
In SETUP menu, press F or G button to highlight System Test.
Press K button to highlight Start.
Press ACTION button to start the System Test.
Press J button to return to Setup Menu.
checks the modem
K
Sat Setup
Guide Setup
K
Ant Setup
Monitor
System Test
Access Card
System test in progress, Please wait...
System Test Screen (System Test in progress)
Display Information
Status: PASSED of FAILED
Status: PASSED of FAILED
Status: PASSED of FAILED
Status: PASSED of FAILED
Serial # xxxx-xxxx-xxxx
Start
Signal Test Status: PASSED
Tuning Test Status: PASSES
Phone Test Status: FAILED
Access Test Status: CHECKING
Card ID 000077196681