Advertisement
Elevation 95X-ALLXX-01 Commercial Cross-trainer
"How To..."
HOW TO... REPLACE THE CONSOLE SUPPORT ASSEMBLY
Tools required: Phillips screwdriver, 13mm socket wrench
Estimated time required: 45 minutes
1. nplug the line cord from the wall outlet.
2. Remove the console back cover. (See the
"How To..." on page 29.)
3. Remove the console. (See the "How To..."
on page 30.)
4. Remove the media tray. (See the "How
To..." on page 31.)
5. Remove the deadshaft end cap covers.
(See the "How To..." on page 32.)
6. Remove the top deadshaft cover. (See
the "How To..." on page 33.)
7. Remove and save the four bolts and
washers that secure the console support
bracket to the monocolumn.
8. Re-route the cabling through the new
console support bracket.
9. Reverse steps 3 through 7 to complete
the re-assembly.
34
Hex Bolts (2
on each side)
Console Support Assembly
Washers (2 on
each side)
Advertisement
