Download
Share
Print this page
Life Fitness 95XE Assembling Instructions
  1. Manuals
  2. Brands
  3. Life Fitness Manuals
  4. Fitness Equipment
  5. 95XE ARCTIC SILVER
  6. Assembling instructions

Life Fitness 95XE Assembling Instructions

Total body trainer
Hide thumbs Also See for 95XE:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: Operating Manual
95Xe Total Body Trainer
A ss em bl y I ns tru c ti o ns

Advertisement

loading

Related Manuals for Life Fitness 95XE

Summary of Contents for Life Fitness 95XE

  • Page 1 95Xe Total Body Trainer A ss em bl y I ns tru c ti o ns...
  • Page 2 Congratulations... and welcome to the world of The following Parts List and the step-by-step assembly procedures have been assembled to make the set-up of the Total Body Trainer as quick and easy as possible. Please take special note of the following important points prior to choosing a location and beginning assembly of the Total Body Trainer.

  • Page 3: Afety Instructions

    ! DO verify the contents of the delivery carton against the accompanying Parts List prior to setting the cartons and shipping material aside. If any parts are missing, contact Life Fitness Customer Support Services at the number listed in the Operation Manual. Save the shipping cartons in case of return.

  • Page 4: Parts Description

    OOLS EQUIRED FOR Magnetic #2 Bit Phillips Screwdriver, T-45 Hex Key Wrench, 16mm Open End Wrench Torx Socket Head Screw M8 – 1.25 x 19 0017-00101-1791 Phillips Pan Head Screw M4.2 – 0.70 x 10 0017-00101-1846 Front Rocker Cover OK62-01009-0000 Console Support Assembly OK62-00123-0000 Front Pivot Arm Cover...
  • Page 5 IMPORTANT! Do not discard the ship kit located on top of the pedal levers. All necessary components needed to complete the installation are located in the ship kit. IMPORTANT! Ne jetez pas le kit placé sur le dessus des leviers de pédale. Il contient tous les éléments nécessaires pour l'installation.
  • Page 6 Locate the DISPLAY CONSOLE (4). Position the CONSOLE near the top of the CONSOLE BRACKET. Attach all CONNECTORS leading from the CONSOLE BRACKET to their corresponding CONNECTORS in the back of the DISPLAY CONSOLE. Feed any excess WIRE HARNESS into the CONSOLE BRACKET and place the DISPLAY CONSOLE onto the CONSOLE BRACKET aligning the mounting holes.

  • Page 8: Pre-Operation Checklist

    The Model & Serial number information of your Life Fitness Total Body Trainer is listed on a label ©2004 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness, Lifepulse, FlexDeck and Smart Stop are trademarks of Brunswick Corporation.