Vtr - Panasonic CQ-VD7200U Operating Instructions Manual

VTR

E
N
G
L
I
S
H
Mode display
13
CQ-VD7200U
IN-DASH 7 INCH WIDE COLOR LCD TV / DVD - VIDEO / RECEIVER
VOLUME
NAVIGATION ASPECT
MUTE MENU MODE MODE NAVI ASP
P·MODE
POWER
[MODE]
[MODE]
22
CQ-VD7200U
You can view the images and listen to the sounds
from the connected external devices in the VTR1
mode and VTR2 mode respectively.
Example:
VTR1 : Camcorder
: Rear View Camera
VTR2
VTR1-IN VTR2-IN
CQ-VD7200U
Hide-away Unit
DISC
TRACK/
ENTER CHANNEL
Camcorder Rear View Camera
VTR1/VTR2 Mode
Press [MODE] to change to VTR1 or VTR2 mode.
Note: You can set up the system so that the VTR
mode is not selected (VTR skip). (a page 42)
(VTR set to either CAMERA INPUT and NAVI INPUT
is not skipped even if VTR skip is set to on.)
External Devices Connectable to VTR1/VTR2
Refer to "Electrical Connections" for each external device connection.
Select the same mode (VTR1 or VTR2) as the terminal that is connected
VCR/Camcorder
to a VCR or Camcorder (VTR1-IN or VTR2-IN).
Select the same mode (VTR1 or VTR2) as the terminal that is connected
to a rear view camera (VTR1-IN or VTR2-IN).
Rear View
Camera
Note: It can also be set to switch to an image through the rear view cam-
era automatically if the shift lever is put into the reverse position.
(a page 40)
Select the same mode (VTR1 or VTR2) as the terminal that is connected
to a car navigation system (VTR1-IN or VTR2-IN).
Car Navigation
Note: It can also be set to switch to an image and sound through the car
navigation system only by pressing [NAVI] (NAVIGATION).
Note: VTR1 and VTR2 terminals are not used for the Panasonic car navigation system (available in future). Refer to
"Electrical Connections" for connection (a page 72-75) and "Navigation Set Up" for setting.
(a page 80-81)
(a page 38)
(a page 38)
CQ-VD7200U
E
N
G
L
I
S
H
14
23