Advertisement
Consumer Defined Control
Note: The Consumer Defined
Control features are adjustments
to the control that will not affect
cooking
results. These include
the Oven
Lockout,
Temperature
Display
and Silent
Control
Operation
features.
Setting Oven Lock Feature
The ov,_o_pad controls the Oven Lockout feature.
The Oven
Lockout feature
automatically
locks the oven door and
prevents the oven from being turned on. It does not disable
the clock,
Kitchen Timer or the interior oven lights. The ovens
can be locked individually.
To activate
the Oven
Lockout
feature
I.
Press _
or []
pad.
2.
Press and hold o_o_ for 3 seconds.
3.
After 3 seconds, "DOOR",
"LOCKED"
will flash and
"Loc" will appear
in the display.
Once the oven door is
locked the "DOOR"
and "LOCKED"
indicator
will stop
flashing
and remain in the display.
Allow 15 seconds for
the oven door to lock.
To reactivate
normal
oven operation:
1.
Press _
or []
pad.
2.
Press and hold ov0_c_K
for 3 seconds. "LOC"
will disappear
from the display. "DOOR"
and "LOCKED"
will flash in
the display
until the oven door has completely
unlocked.
3.
The appliance
is again
fully operational.
Note:
Because you can set the oven lockout
individually,
the
lower oven can be used when the upper oven lockout
feature
is on.
Setting Silent Control Operation
The DELAY START and SELF CLEAN pads control
the Silent
Control operation
feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever
necessary. If desired the control
can be programmed
for silent operation
and later returned
to operating with all the normal sounds and beeps.
To change
control
from normal
sound
operation
to
silent control
operation
1.
Press and hold DELAY START pad for 6 seconds. After 6
seconds, "bEEP"
(On) will appear
in the display.
2.
Press SELF CLEAN pad to switch between
normal sound
operation and silent operation
mode.
3.
Press Q
to accept
the change
or press (_) to reject the
change.
Note: The control
will always
beep at the end of a kitchen
timer and will beep when a set temperature
has been
reached,
even if the control
is set to silent operation.
Setting Temperature
Display m
Fahrenheit
or
Celsius
The BROIL and SELF CLEAN pads control
the Fahrenheit
or
Celsius temperature
display modes. The oven control can
be programmed
to display
temperatures
in Fahrenheit
or
Celsius. The oven has been preset at the factory
to display
in Fahrenheit.
Note: both ovens will be changed
at the same
time.
To change
display
from
Fahrenheit
to Celsius or
Celsius to Fahrenheit
1.
Press BROIL pad and hold for 6 seconds. A beep will
sound, "550"
will appear
"BROIL"
will flash in the
display. After 6 seconds a beep will be heard and "F"
or "C" will appear
in the display.
.
.
If "F"
appears,
the display
is set to show temperatures
in Fahrenheit.
If "C" appears,
the display
is set to show
temperatures
in Celsius.
Press SELF CLEAN pad to switch between
Fahrenheit
or
Celsius display
modes. The display
will show either "F"
or
IICII.
Press Q
to accept
the change
or press Q
to reject the
change.
Operating
Oven Lights
The interior oven lights will turn ON when the oven door is
opened.
O
Press _,_,, to turn oven light ON an OFF whenever
the oven
door is closed.
The interior
oven lights are located
on the rear wall of the
oven interior
and are covered
with a glass shield. The glass
shield protects
the bulb from high temperatures
and should
always
be in place whenever
the oven is in use.
To replace
the interior
oven lights, see Replacing
oven lights
in the Care and Cleaning
section.
Note: The oven light will not operate
during
self clean cycle.
17
Advertisement
