Download Print this page

Kenmore 790.9731 Series Use And Care Manual page 31

Double oven range

Advertisement

General Care & Cleaning
Removing
and Replacing the Oven Door
_The
door is heavy. For safe, temporary
storage,
lay the door flat with the inside of the door facing
down.
To Remove Oven Door:
1.
Open
oven door completely
(horizontal
with floor-
See
Fig. 1).
2.
Pull the door hinge locks on both left and right door
hinges down from the oven frame completely
towards
the oven door (See Fig. 2). A tool such as a small flat-
blade screwdriver may be required.
3.
Firmly grasp both sides of
sides (Do not use the oven
4.
Close the door to about a
Fig. 3.
5.
oven door along the door
door handle-
See Fig. 3).
10 degree
angle as shown in
With the oven door in this position,
lift the oven door
hinge arms away from the roller pins located
on each
side of the oven frame (See Fig. 4).
To Replace Oven Door:
1.
Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle-
See Fig. 3).
2.
Holding
the oven door at the same angle as the removal
position,
seat the hook of the hinge arm onto the roller
pins located
on each side of the oven door frame
(See
Fig. 4). Also seat the notch of the hinge arm onto the
bottom
of the slot at the same time you seat the hook.
The hook and the notch of the hinge arms must be fully
seated onto the roller pins.
3.
Fully open the oven door (horizontal with floor- See Fig. 1).
4.
Push the door hinge locks up towards
and into the oven
frame
on both left and right oven door hinges (See Fig.
2) to the locked position.
5.
Close the oven door.
Special Door Care Instructions
- Most oven doors contain
glass that can break. Do not close the oven door until all
the oven racks are fully in place.
Do not hit the glass with
pots, pans, or any other object. Scratching,
hitting, jarring
or stressing the glass may weaken its structure causing
an
increased risk of breakage
at a later time.
(
Figure 1 - Door hinge location
I
Figure 2 - Door hinge locks
Oven
door
-
Figure 3 - Holding
door for removal
Roller
Hinge
Oven door hinge
location
/
/
/
Figure 4 - Location
of hinge arm and roller pin
31

Advertisement

loading

This manual is also suitable for:

790.9732 series