Identify Parts; Tools Needed - SRAM rock shox User Manual

English
To ensure that your seatpost performs properly and to help make your riding experience more
enjoyable and trouble-free, we highly recommend that you have it installed by a qualified
bicycle mechanic. We also highly recommend wearing your safety glasses every time you
install and/or service your bicycle components.
Important: DO NOT attempt to adjust air pressure using the air valve located at the bottom
of the seatpost. Any change in the factory air pressure setting will render the seatpost
inoperable, requiring full service.
COMPATIBILITY
•
RockShox seatposts are compatible with saddles with 7 mm rail diameters and are
designed for use with 30.9 mm and 31.6 mm seat tube internal diameters.
• Seatpost and seat tube diameters must be the same. RockShox seatpost diameters are
printed on the products.
Important: Do not use a reduction sleeve to alter the seat tube diameter.

TOOLS NEEDED

• •
Safety glasses Friction paste
• •
4 mm hex wrench Isopropyl alcohol
• ® •
T25 TORX wrench Clean, lint free rag
•
Torque wrench
2
Reverb User Manual
IMPORTANT
95-4215-000-000 Rev B
Reverb User Manual

IDENTIFY PARTS

C
B B
D
E
A - Saddle clamp bolts (2)
B - Saddle clamp nuts (2)
C - Top clamp
D - Bottom clamp
E - Minimum insertion line
Copyright © 2010 SRAM, LLC
English
A
A
G
F
H
J
I
F - Remote hose
G - Strain relief boot
H - Remote assembly
I - Actuator
J - Speed adjuster
3