Safety And Preparations; Important Safety Instructions; Certification Standards - Eaton T800R-00500 Instruction Manual

Safety and preparations

Safety and preparations

Important safety instructions

Save these instructions—This manual contains important
instructions for the Power-SureE T800R/T800P/T800F that
must be followed during operation of the equipment .
Opening enclosures exposes hazardous voltages.
Always refer service to qualified personnel only.
WARNING
As standards, specifications, and designs are subject to
change, please ask for confirmation of the information
given in this publication.
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules . These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment .
Note: This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio communications .
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference
at the users own expense .
iv Instruction manual—single-phase power conditioners IM01002005E September 2015 Eaton.com
WARNING

Certification standards

ANSI/IEEET C57 .12 .91 transformer test code
● ●
ANSI C62 .41 Category B-3
● ●
NFPAT 70—National Electrical CodeT
● ●
FCC Class A limits, 47 C .F .R . Part 15, Subparts A, B
● ●
ULT listed to Standard 1012, power supplies—
● ●
general purpose
cULT listed to CSAT Standard C22 .2, No . 107 .1-01
● ●
NEMAT PE 1 (National Electric Manufacturers
● ●
Association)
NEMA 250 (National Electric Manufacturers Association)
● ●
Enclosures for electrical equipment (1000 V maximum)
● ●
ISOT 9001:2008
● ●
Occupational Safety & Health Administration (OSHA)
● ●
WARNING
To reduce the risk of fire or electric shock, install
in a temperature- and humidity-controlled indoor
area free of conductive contaminants.
This equipment is intended only for installations
in a restricted-access location.
WARNING
High leakage current. Earth connection is essential
before connecting supply.