DEK 265 horizon Engineering Specification page 40

ENGINEERING SPECIFICATION
MACHINE OPTIONS
AutoFlex
34
AutoFlex tooling is a fully automatic tooling facility, which allows board
support for each product to be programmed into a product file. The correct board
support pins for each product are selected automatically when the board
parameters are programmed into the product file. The pins are raised and
lowered pneumatically and clamped electro-magnetically once in position.
Additional magnetic pins can be added to improve board support.
Pictorial display of the AutoFlex tooling matrix and soft key menus allows the
user to easily amend the pin configuration for a particular product file, if
required. Additional Diagnostic pages allow for full testing of the AutoFlex
tooling facility.
Tooling Plate
Maximum Board Size
Pin Diameter
Pin Spacing
Number of Pins
Lowered Pin Clearance
Electrical Power
Pneumatic Power
Engineering Specification
510mm x 508mm
4mm
35mm
210 (15 x 14 array)
Maximum 40mm
Derived from internal supply, maximum load 750VA
Derived from internal supply, maximum usage 0.5 litres/change
Board Support Pins
Chapter Issue 1 May 00