t.amp TSA 4-700 User Manual page 34

Connections and controls
4 Power supply input powerCON (NAC3FA).
5 [RESET]
Push-button to reset the built-in automatic fuse in case it has tripped.
6 [OUTPUT CH-A] ... [OUTPUT CH-D]
Signal outputs, designed as lockable NL4 panel sockets for connecting speakers.
7 [INPUT A] ... [INPUT D]
XLR signal input sockets.
8 [M1]
Slide switch; determines how the input signals A and B are processed. In the lower switch position, the signals are fed
separately to the power amps. In the upper switch position, the signals are added and fed as a mono sum signal to
the power amps. The connection of the power amps is set by the push-button (11).
9 [M2]
Slide switch; determines how the input signals B and C are processed. In the lower switch position, the signals are fed
separately to the power amps. In the upper switch position, the signals are added and fed as a mono sum signal to
the power amps.
34
power amplifier