Table of Contents
Advertisement
Before using your washing
machine for the first time
6
Attention
The washing machine must have been installed and
connected properly refer to Page 29.
i The washing machine was tested before leaving
the factory. To remove any water left over from
testing procedures, the first washing cycle should
be carried out without laundry in the machine.
q Turn the tap on.
q Pull out the detergent drawer all the way.
q Pour approx. 1 litre / 1 ¾ pt of water into cham
ber II of the detergent dispenser.
q Half fill the measuring beaker with detergent
and pour into chamber II.
i Do not use any special detergents for delicates
or woollens (excessive foam).
q Close the detergent drawer.
q Close the washing machine door.
q Set the programme selector to Cottons y,
90 °C.
q Press the Start M button.
The programme starts.
The programme has ended when the
End indicator light is lit:
q Turn the programme selector to Off.
Advertisement
Table of Contents
