Cleaning water inlet
strainers
Clean the water tap filter
Clean the filter in the
machine's water inlet
22
d Risk of electric shock!
If no water, or only very little, is admitted into the ap
pliance.
First clear the pressure that has built up in the fresh-
water hose:
q Close the tap.
q Set the programme selector to any wash pro
gramme (except Spin B/Drain b).
q Press the Start M and let it work for around 40
seconds.
q Set the programme selector to the Off position.
q Pull the hose from the tap.
q Rinse the filter under running water.
q Re-attach the hose.
q Unscrew the fresh-water hose from its connection
to the appliance.
q Remove the filter by using some flat-nose pliers;
clean it under the tap.
q Re-attach the hose.
q Open the tap and check whether any water is
coming out of the hose. If water continues to come
out, checkthat the filter is properly connected.