Cleaning Water Inlet Strainers - Bosch WFO2466GB Instruction Manual

Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washing machine
This is necessary if very little or no water flows into
the washing machine.
First release the water pressure in the supply hose:
q Turn off the water tap.
q Turn the programme selector to any programme
(except Spin and Drain).
M
q Press the Start button, and allow the program
me to run for approx. 40 seconds.
q Turn the programme selector to Off
q Disconnect the hose from the water tap.
q Rinse the strainer under flowing water.
q Connect the hose.
q Disconnect the hose from the back of the washing
machine.
q Pull out the strainer and rinse under running water.
q Insert the strainer and reconnect the hose.
q Turn on the water tap and check whether water is
still discharged. If water is still discharged, check
that the strainer is attached properly.
q Turn off the water tap.
35