Call Forwarding - To An Outside (Co) Line - Panasonic KX-TA624 User Manual

3.2 Telephone Features
Call Forwarding — to an Outside (CO) Line
You can forward calls to an external party.
System programming is required to execute this feature.
Setting
PT and SLT
Lift the handset
or press
SP-PHONE/MONITOR.
Conditions
• If an incoming outside call is forwarded to an outside (CO) line, the "Outside-to-
Outside (CO-to-CO) Line Call Duration Time" is applied to the call and the line will be
disconnected when it expires (default: 10 minutes). An alarm tone is sent to both parties
fifteen seconds before the assigned duration time limit.
• Up to thirty-two digits (including the line access code) can be programmed.
• If a CPC signal is sent to an outside (CO) line before the assigned duration time limit, a
call between two external parties will be disconnected.
• This feature cannot be used for incoming outside calls from lines assigned as
"Normal", by System Programming.
• An account code must be entered by pressing "
after the line access code in the account code verify-all and forced modes.
Programming References
• System Programming — Installation Manual
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[414]–[416] Outside (CO) Line Mode — Day/Night/Lunch
[605] Account Code Entry Mode
[607] Call Forwarding to an Outside (CO) Line
FWD/DND
For a PT
3
7 1
For an SLT
For a PT: Press
Dial 3.
FWD/DND.
For an SLT: Dial 71.
<PT Display Example>
• When you dial line access code "9":
FWD(All) All COs
• When you dial line access code "81 through 86":
FWD(All) CO Gx
• The FWD/DND indicator light flashes red slowly.
line access code phone no.
Enter the line Enter the
access code phone number.
(9 or 81 through 86).
outside (CO) line group number
" and entering the account code
#
Confirmation Hang up or press
Dial #.
tone and SP-PHONE/MONITOR.
dial tone
Telephone Features
C
3-17