Related Manuals for Mirage KP-1 series
Summary of Contents for Mirage KP-1 series
- Page 1 MIRAGE KP-1 Pre-Amplifier Instruction Manual IN-SHACK GaAsFET PRE-AMPLIFIER KP-1 Series 10M, 6M, 2M, 1-1/4M, 70 CM Version A Copyright © 1996, MIRAGE Communications Before operating this unit, please read these instructions completely.
- Page 2 3.5mm DC Coaxial jack Installation The Mirage KP-1 connects in-line between your radio and your antenna. The KP-1 requires a positive 13.6 - 15 Vdc power source. The center pin of the 3.5mm coaxial power jack, located next to the RCA phono plug labeled REMOTE, is positive.
- Page 3 If you have any problem with this unit, first check the appropriate section of this manual. If the manual does not reference your problem or your problem is not solved by reading the manual you may call MIRAGE at 662-323-8287. You will be best helped if you have your unit, manual and all information on your station handy so you can answer any questions the technicians may ask.
-
Page 4: One-Year Limited Warranty
ONE YEAR LIMITED WARRANTY Any Mirage Communications product found to be defective in materials or workmanship will be repaired or replaced (at Mirage's option) for a period of one year from the date of original purchase. During the warranty period Mirage Communications will provide, free of charge, both parts and labor necessary to correct defects in material or workmanship. - Page 5 MIRAGE KP-1 Pre-Amplifier This warranty gives specific legal rights and you may also have other rights which vary from state to state.