Call And Phone Management; Call Forward; Auto Answer - Win eNet660S-ENIP2061 User's Reference Manual

Call and Phone Management

Operation

Call Forward

Auto Answer

ENIP2061 Quick Reference Operating Guide

 Call Forward

 Status

 Forward Number

 Forward Call
Type

 No Answer
Forward
Note: It is possible to activate different kinds of call forward at the same
time. Ex: No Answer forward + Busy Forward, etc.
You can use this function to auto answer all incoming call when you are
busy on something and hope the call can be received automatically.


Auto Answer

Description
1. Press the "Config" softkey.
2. Use the navigation keys to select the Call
Forward item and press the ENTER key to
validate the selection. Select the next item
according to the type of call forward (Always
Forward, Busy Forward, No Answer Forward or
DND forward) you would like to activate.
3. Choose the Status item to turn On/Off the call
forwarding feature. Select On or Off then press
the ENTER key to validate.
4.
Select the Forward Number item to input the
phone number you wish to forward the calls to.
5. Select the Forward Call Type item to select
ICM, Outside or Both. ICM means enable the
call forward when the call comes from internal
extension. Outside means enable the call
forward when the call comes from IP trunk,
PSTN trunk or IGW Group. Both means enable
the call forward when the call comes from
internal extension, IP Trunk, PSTN trunk or
IGW Group.
6. For No Answer Forward item, there is one
additional item "No Answer Time" for user to
set. If the phone doesn't answer the call after
this time, the call will be forwarded to the
destination. (Default value is 15 seconds)
1. Press the "Config" softkey.
2. Use the navigation keys to select the Auto
Answer item and press ENTER key.
3. Use the navigation keys to choose to turn On
or Off and press ENTER key to validate.
Page 33 of 35