Receiving A Call; Receiving A Call Via Specific Trunk; Last Number Redial; Mute The Microphone - Win eNet660S-ENIP2061 User's Reference Manual

Receiving a Call

Receiving a Call
via Specific
Trunk
Last Number
Redial
Mute the
Microphone
Adjust the Voice
Volume During a
Conversation
ENIP2061 Quick Reference Operating Guide
5. Place the handset On-hook when you finished
the conversation.
1. Pick-up the handset during ringing
2. Start talking to caller party.
3. Place the handset On-hook when you finished
the conversation.
1. While getting an incoming call from a specific
trunk, the related line key LED will flash and the
phone may ring. You can pick-up the handset or
press the related line key to receive the call.
2. Start talking to caller party.
3. Place the handset On-hook when you finished
the conversation.
4. Press the REDIAL key, the LCD will show last 30
dialed numbers.
5. Use the navigation keys to select a dialed call

and press "Dial" softkey to redial.
1. While
(handset, headset or hands-free mode), you can
mute the microphone by pressing the MUTE
key.
2. The LED of the MUTE button will light. At this
moment, the user may speak freely, the outside
party will not hear anything.
1. During a conversation, if the voice volume is too
low or too high, you may adjust it.
2. Press the volume control key to adjust the
volume.
Page 20 of 35
being engaged in a conversation