Advertisement
Configuration
1. Configuring the Device Using the Web Browser
You can access the router for status monitoring, configuration, and administration after
entering the IP address of the router into the web interface. The default router IP address is
192.168.1.1 (netmask 255.255.255.0). Configuration access is allowed for the user "root" with
the initial password "root". Attention, it is necessary to use HTTPS protocol for secure
communication over a network! For a detailed description and examples of the router con-
figurations, see the Configuration manual.
2. Restoring and Backing up the Router Configuration
After you reset the router, the current configuration is overwritten by the default settings.
We recommend that you back up the router configuration before resetting the device. Refer to
the Configuration manual for more information.
When the PWR LED starts blinking, it is possible to restore the default configuration of the
router by pressing the RST button on the rear panel. After pressing this button, the default
configuration is restored and then the router reboots (green LED will be on).
After logging on to the device for the first time, we strongly recommend to change
the default password due to security reasons. Simultaneously, you will gain ac-
cess to all functions of the router.
Documentation
User's Manual and Configuration Manual for the router can be found on the company web
site www.bb-smartcellular.eu/download. Please, use the following login information:
Username: smartrouters
Password: smartrouters
We declare that the SmartStart router SL304 is in compliance with the essential re-
quirements and other relevant provisions of direction 1995/5/EC.
The Declaration of Conformity is available on the company website or from technical support,
on request.
4
QSG issued in CZ, May 10, 2016
START GUIDE
Advertisement
