Clearing Out A Name Assigned To A Psd Key - Panasonic 44-Series User Manual

2. Setting Up Your Phone

Clearing Out a Name Assigned To a PSD Key

Note: You will need to know the PSD bin number for the key in order to clear
out an assigned name. To check the bin number for a key, see "Checking PSD
Numbers" on page 29.
1. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Dial #1.
4. Press AUTO.
5. Enter the PSD bin number for the key you want to clear (Example: 91, 903,
etc.).
6. Press AUTO as many times as necessary to clear out the name.
Note: It is strongly recommended that you assign the PSD bin number as
a name for the key at this point so that it will appear on the display for
future use. The bin number should be entered in the following format: "-
PSDxx (or xxx)" where xx or xxx = the actual bin number. Example: "-
PSD901". Use the information in steps 7-10 under "Assigning Names to
PSD Numbers" on page 30 as a guide.
7. Press HOLD.
8. Press ON/OFF.
Note: If using a large-display phone, press MENU, then the key to the
left of PERSONAL DIAL to have the change reflected on the display.
DBS-32-755 Issued April 2000 33