Panasonic 44-Series User Manual page 13

1. Understanding Your Phone
Table 2. Small-display phone features
# Feature
1 Message Waiting Indica- Indicates that you have a message.
tor
2 Display Displays information about the phone's status,
menus, dialing directories, and text message infor-
mation.
3 Mode Key Used to change display modes from default to speed
dial or extension directory mode.
4 End Key Used to exit directory mode and return display to
default mode.
5 Soft Keys Used to select System Speed Dial or Personal Speed
Dial directory and also to speed dial a number or
extension from within a directory.
6 PROG Key Used to program FF and one-touch keys and to
adjust ringer volume. Depending on the setup of
your system, may also be used to transfer calls.
7 CONF Key Used to establish conference calls, check FF key
and one-touch features, and scroll through mes-
sages.
8 One-Touch Keys Used to make outside calls or to access system fea-
tures.
9 Flexible Function (FF) Used to access outside lines or to access system fea-
Keys tures.
10 DND/CF Indicator Indicates that Do-Not-Disturb, Call Forwarding, or
Absence Message is set.
11 MUTE Indicator Indicates that your voice is muted - i.e., party on the
other end cannot hear you. Lights solid when your
hands-free microphone is muted and flashes when
your handset is muted.
12 EXT Indicator Lights when you are on a call; flashes when you
hold a call.
13 ON/OFF Indicator Lights when ON/OFF key has been pressed.
14 REDIAL Key Used to redial last number dialed.
15 MUTE Key Used to activate/deactivate MUTE function. When
activated, the party on the other end cannot hear
you. (See item 11, MUTE Indicator.)
16 AUTO Key Used to access speed dialing, enter account codes, or
for message waiting answer/cancel.
17 ON/OFF Key Used to make a call without lifting the handset or to
turn the speaker on and off.
18 FLASH Key Used to end an outside call and to restore outside
dial tone without hanging up receiver.
19 VOLUME Key Used to adjust level of tones, background music,
ringing, receiver volume, and display contrast.
20 HOLD Key Used to hold calls, to retrieve held calls, and to com-
plete FF key programming.
DBS-32-755 Issued April 2000
Description
11