Instructions - Gardenline GLM1501 Power Manual

GLM1501 User Guide AW.qxd

Instructions

Setting the cutting heights
Important! Adjust the cutting height only when the engine is
switched off and the power cable has been disconnected.
Before you begin to mow, check to ensure that the blade is
not blunt and that none of the fasteners are damaged. To
prevent any imbalance, replace blunt and/or damaged
blades. To carry out this check, first switch off the motor and
pull out the power plug.
The cutting height is adjusted as follows (see Fig. 16):
To adjust the cutting height press the button (A) and
•
push down or raise the device. Once the desired height
has been set, button (A) must be pulled up again.
Reading off the cutting height
The cutting height can be set between 25-75 mm in 6
intervals, and can be read off on the scale (Fig. 16/B).
16
A
B
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 7781
16/12/08 1:42 pm Page 18
5
17