Turning Power On And Off; Connecting The Power Cable - Nortel 1200N User Manual

Installation

Turning Power On and Off

Connecting the
Power Cable
NOTE
Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
This section describes the procedures for connecting the power cable to the ATM
Switch and the procedures for turning the power on and off.
Make sure the power unit fastening screw on the back of the ATM Switch is
properly screwed. Connect the power cable to the power connector and the other
end of the cable to power supply, for example, the power outlet.
Figure 7-12: Connecting the Power Cable
DC power cable : White (0V), Brack (-48V), Green(FG)
Since maximum power consumption is large, be sure to draw power directly from
an outlet. Never share the same outlet with other devices. Never connect the
ground wire to a gas pipe.
Turning Power On and Off
7-15