Switch Configuration - Nortel 1200N User Manual

Worksheets
2.5 Gbps Switch Configuration Worksheet
Switch
Configuration
Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
The Centillion 1200N is a 2.5 Gbps Switch.
Each ATM switch has unique and definitive configuration requirements that must
be met prior to activation. Items such as Hostname, IP Address, and ATM address
are required for each switch.
The configuration worksheets in this section are intended to provide a template for
these switch requirements. Each configuration worksheet outlines both the switch
and individual port configurations, allowing quick look-up during installation and
configuration.
These worksheets, although optional, can provide a common source for
configuration as well as for future reference.
Parameter
Host Name
NSAP Address (If using PNNI v1.0, see
PNNI Configuration .)
ATM IP Address/Subnet Mask
Ethernet IP Address/Subnet Mask (if
applicable)
Software Version
Enable Password
Telnet Password
Location
Contact and Phone Number
Clock Mode (Master/Slave, Port #s)
Switch PNNI Method
(hop-by-hop or source)
Serial #
C
Value Setting
C-1