Cprm Id Number And Data Setting - Pioneer DVR-520H-S Service Manual

5

7.1.1 CPRM ID NUMBER AND DATA SETTING

Entering the ID Number and ID Data for DVD Recorder
For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual number (ID number) and ID data to
each recorder. If the number and data are not set correctly with the following procedure, operations in the future may not be guaranteed.
You will find the ID number to be set on the ID label on the rear panel.
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it according to "How to
confirm the ID number" shown below.
The Input is Necessary When:
• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.
• When the MAIN ASSY , DRIVE ASSY or the HDD is exchanged.
JIGS AND MEASURING INSTRUMENTS
Service Remote Control
Unit (GGF1381)
5
6
DVD Recorder Data Disc
(GGV1179)
(*) Refer to P138.
DVR-520H-S
6
7
7
8
A
B
C
D
E
F
77
8