Cprm Id Number And Data Setting - Pioneer DVR-555HX-S Service Manual

5

8.3 CPRM ID NUMBER AND DATA SETTING

[Purposes]
For the DVD recorder,it is necessary with the recoding/playback of DVD-RW disc to set an individual
number (ID number) and ID data to each recorder. If the number and data are not set correctly with the
following procedure, cannot work with residual quantity 0:00 or operations in the future may not be
guaranteed with RW disc. You will find the ID number to be set on the ID label on the rear panel.
The Input is Necessary When:
• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.
• When the MAIN ASSY or the HDD is exchanged.
[Tools to be used]
Remote control unit supplied
with the unit (VXX3221)
[Notes] Important: If no ID label is found on the rear panel, write down the specified ID number by checking it
• Input the ID number while the unit is in Stop mode.
• After the data are read from the data disc (Type 2), the disc will automatically be unloaded.
5
6
STANDBY/ON HDD/DVD
PREV PAUSE STOP NEXT
PLAY
HELP REC INFO
TOP MENU
DISC HOME MENU
NAVIGATOR GUIDE
CHANNEL CM BACK
+
ENTER
–
CHANNEL CM SKIP
A.TV/D.TV RETURN/EXIT
OPEN
Remote control unit for servicing
according to "How to confirm the ID number" shown below.
DVR-LX60D
6
7
DVD Recorder Data Disc (Type 2)
(GGF1381)
Be sure to use the latest disc (Type 2).
In Feb, 2007, the latest disc is GGV1305.
7
8
A
B
C
D
E
F
83
8