Cprm Id Number And Data Setting - Pioneer DVR-533H-S Service Manual

1

7.1.2 CPRM ID NUMBER AND DATA SETTING

[Purposes]
For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual
A
number (ID number) and ID data to each recorder. If the number and data are not set correctly with the
following procedure, cannot work with residual quantity 0:00 or operations in the future may not be
guaranteed with RW disc. You will find the ID number to be set on the ID label on the rear panel.
The Input is Necessary When:
• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.
• When the MAIN ASSY , DRIVE ASSY or the HDD is exchanged.
[Tools to be used]
B
Remote control unit supplied
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it
[Notes]
• Input the ID number while the unit is in Stop mode.
• After the data are read from the ID data disc (GGV1239), the disc will automatically be unloaded.
C
D
E
F
68
1
2
STANDBY/ON ONE TOUCH OPEN/CLOSE
COPY
HDD DVD
ABC DEF INPUT
SELECT
GHI JKL MNO
PQRS TUV WXYZ CH
+ CLEAR
CLEAR
AUDIO SUBTITLE ANGLE PLAY MODE
MENU
DISC NAVIGATOR
TOP MENU
ENTER
HOME
MENU RETURN
TV GUIDE INFO HELP DISPLAY
REV SCAN PLAY FWD SCAN
PAUSE STOP CM
OK BACK SKIP
PREV CASE NEXT STEP/SLOW
SELECTION
REC STOP REC REC MODE TIMER REC
ì
TV CONTROL
INPUT CHANNEL VOLUME
SELECT
DVD RECORDER
Remote control unit for servicing
with the unit (VXX2967)
according to "How to confirm the ID number" shown below.
2
3
(GGF1381)
( *1 ) DDV1239 will be released on July 2005.
Until new disk(GGV1239) will be released, use GGV1179.
DVR-533H-S
3
4
DVD Recorder Data Disc
(GGV1239)( *1 )
4