Cables And Accessories; Using Accessories With Devices - National Instruments NI 6711 User Manual

Chapter 1 DAQ System Overview

Cables and Accessories

Using Accessories with Devices

Analog Output Series User Manual
For a detailed calibration procedure for AO Series devices, refer to the AO
Waveform Calibration Procedure for NI-DAQmx document by selecting
Manual Calibration Procedures at
NI offers a variety of products to use with Analog Output Series devices,
including:
• BNC accessories
• Connector blocks with screw terminals
• I/O connector cables
• RTSI bus cables
• Low channel-count digital signal conditioning modules, devices, and
accessories
For more specific information about these products, refer to
The following sections contain information on how to select accessories for
your AO Series device.
Table 1-1. Accessories and Cables for Analog Output Devices
Device
NI 6711/6713
NI DAQCard-6715
ni.com/calibration
Accessories
Cables
SH68-68-EP
SHC68-68-EP
SHC68U-68-EP
1-4
.
.
ni.com
Terminal Blocks
BNC-2110
CB-68LP
CB-68LPR
SCB-68
TB-68
BNC-2110
CB-68LP
CB-68LPR
SCB-68
TB-68
ni.com