Table of Contents
Advertisement
CPU VRM Switching Frequency [Auto]
This item affects the VRM transient response and VRM component temperatures. Setting a
higher switching frequency will result in better transient response at the expense of higher
VRM temperature.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when the CPU VRM Switching Frequency is set to
[Manual].
Fixed CPU VRM Switching Frequency(KHz) [300]
This item allows you to set a higher frequency for a quicker transient response speed.
Use the <+> and <‑> keys to adjust the value. The values range from 250KHz to
500KHz with a 50KHz interval.
CPU Power Duty Control [T.Probe]
This item allows you to adjust the duty cycle of each VRM phase based upon current and/or
temperature.
[T. Probe]
[Extreme]
CPU Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU.
Configuration options: [Auto] [Standard] [Optimized] [Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
2-20
Sets the buck controller to balance VRM FET temperatures.
Sets the buck controller to balance per phase current.
Chapter 2: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
