Thermostat - Mitsubishi L3E Service Manual

THERMOSTAT

Water outlet
fitting
Renew
gasket
Thermostat
fitting
Figure 114 Installing thermostat
Stir up hot water
Figure 115 Inspecting thermostat
110 / 155
COOLING SYSTEM
28 THERMOSTAT
Thermostat
28.1 Removal and installation
Never place Pay attention to the following:
thermostat
1.
stay in
direction of 2.
thermoswitch
hole.
28.2 Inspection
If the thermostat does not operate properly, replace it.
Table 46
ENGLISH
Set the thermostat in place.
Renew the gasket.
Item
Valve cranking
temperature
Full-open temperature
(lift 6 mm)
Inspection thermostat
Service Manual Mitsubishi L-Series diesel engines
COOLING SYSTEM
Specification
76.5°C 71°C
[169.7°F] [159.8°F]
76.5±1.5°C 71°C
[169.7±2.7°F] [159.8°F]
90±1.5°C 85°C
[194±2.7°F] 185°F]
Version 08/2004