Table of Contents
Advertisement
Quick Links
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4
MP 110
MP 110TG
MP 110 M
MP 110 M TG
Alarm Unit
User Manual
IS0099-AE
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Advertisement
Table of Contents
Related Manuals for Elkron MP 110 M TG
Summary of Contents for Elkron MP 110 M TG
- Page 1 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 1 2 3 4 MP 110 MP 110TG MP 110 M MP 110 M TG Alarm Unit User Manual IS0099-AE...
-
Page 2: Table Of Contents
12 Lock of alarm in progress ..............31 13 Calling back ................... 31 SYSTEM MANAGEMENT WITH ELECTRONIC KEY DK2000M ..........32 Commutator description ..............32 Electronic key programming ............32 Arming/disarming ................36 (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 3: Keypad Description
A flashing light indicates that there are protected zones (doors or windows protected by contacts) that are still open. A flashing light indicates that some sensors/contacts are disabled. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 4: Access Codes
1-minute delay (that is reset each time the key is pressed). If a delay time-out occurs, the procedure is exited automatically without saving the changes made. • The pressing of each key whileentering the secret code causes an asterisk to be displayed. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... - Page 5 (when programmed). With the key permanently inserted, code at the end of the fourth cycle, the system exits the procedure and EXIT remains in the previous mode. 4. Press the key to exit the procedure. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL...
- Page 6 7. To change the association of the zones, continue as indicated in item To terminate the auxiliary codes enabling/disabling operations, and to store the selections made, press the key twice and then press EXIT key to exit programming. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL...
- Page 7 Press key to exit. To make the desired keys operating, follow the procedu- re “ Addition of a key” , para 2.2. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL...
- Page 8 7. Re-insert the key. If the operation has been successfully performed, the leds of the zones previously associated with the key will light up and led 2 flashes slowly while standing by for the programming of any other keys. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL...
-
Page 9: Sensor Excluded/Re-Entry
2 different keys). EXCLUDED zones. CHECK OF STORED KEYS EXIT 6. Press to exit the programming function. For checking previously programmed keys, by verifying correctness of code, the key number and the zones controlled. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 10: Display Of Zone Status
• The message “ZONE OPEN nn” will appear on the display (where nn is the number of the sensor, refer to the sensor table to know which zone it corresponds to). (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... - Page 11 5. At the end of the reproduction, a following message can be selected. EXIT Press to exit from listening procedure. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL...
-
Page 12: Clock Setting
The keypad display will visualize the following message: (flashing). 4. At the end of the test, you go back to the main menu of the communicator parameters. EXIT 5. Press key to exit. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 13: System Test
3. The display visualizes the first programmed telephone number: “Tn: nnnn——n” (if there is no programmed telephone number, there will be empty characters). 4. To go to other available numbers, if any, use keys (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 14: Telephone Line Test
0 to 31).The display will show the number of the chosen day in a fixed mode. • The display will show the characters “ ” flashing to show the introduction of the month. • Enter a value from 01 to 12 (2 digits). (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 15: Call Result Visualization
• The first EXCLUDED zone is displayed with “nn” (where nn is the number and return to the communicator menu. of the sensor, refer to the sensor table to know to which zone it corresponds) (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 16: Lock Of Alarm In Progress
- B - (mode B) EXP.2 OPENING TAMPER WIRE INPUTt/A EXP.2 5. Press key to confirm and exit from programming EXP.3 OPENING TAMPER FALSE KEY EXP.4 OPENING TAMPER SERIAL LINE SABOTING TELEPHONE LINE FAILURE (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 17: List Of Messages On Display
5. The number of the sensor flashes on the keypad screen To select the next zone, press the key. If there are no EXCLUDED zones, the symbol “- -” (two hyphens) appears on the display. EXIT 6. Press to exit programming (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 18: Keypad Description
A flashing light indicates that there are some protected zones (doors or windows protected by contacts) that are still open. A flashing light indicates that some sensors/contacts are disabled. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... -
Page 19: Access Codes
• After selecting the desired configuration for the zones, arming is confirmed by pressing the key without waiting for the time available for arming to expire. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL... - Page 20 Led OFF = Code disabled displayed commutators’ leds). KEY CODE (EK) 3. Press the key next to the led for enabling/disabling the corresponding code. EXIT 4. Press the key to exit the procedure. (((ELKRON))) (((ELKRON))) MP110 USER MANUAL MP110 USER MANUAL...
Need help?
Do you have a question about the MP 110 M TG and is the answer not in the manual?
Questions and answers