IVT 12PHR-N Service Manual page 58

12PHR-N
TIPS ABOUT INDICATOR PANEL
The indicator panel will change each time you press the DIS-
PLAY button in the following manner.
Display button
Outdoor Temp.Lamp lights up
The blue PLASMACLUSTER lamp and
the green FULL POWER lamp will also
go off.
FULL POWER OPERATION
In this operation, the air conditioner works at the maximum power to makes the room cool or warm rapidly.
1 Press the FULL POWER button during operation.
• The remote control will display "
• The temperature display will go off.
• The green FULL POWER lamp (
12PHR-N_S530612PHRN.indd 2
The room
temperature is
displayed .
The outdoor
temperature is
displayed.
No display.
".
) on the unit will light up.
TO CANCEL
Press the FULL POWER button again.
• The green FULL POWER lamp (
NOTE:
• You can not set the temperature or fan speed during the FULL POW-
• FULL POWER operation will be automatically cancelled in one hour,
1
6-2
NOTE:
• The displayed temperatures are rough estimates and may vary
from the actual temperatures.
• is displayed until the temperatures are being detected.
• Only the room temperature can be displayed for 5 seconds when
the unit is not in operation.
• During SELF CLEAN operation, the indicator panel will display re-
maining time of the operation. Room and outdoor temperature will
not be displayed even if you press the DISPLAY button.
• Temperature display ranges
Room temperature
Temperature Indicator Room temperature
Outdoor temperature
Temperature Indicator Outdoor temperature
*
*The minus symbol "-" is not displayed.
ER operation.
and the unit return to the original settings. The green FULL POW-
ER lamp ( ) on the unit will turn off.
Above 40˚C
0˚C~40˚C
Below 0˚C
Above 45˚C
-19˚C~45˚C
-25˚C~-20˚C
Below -25˚C
) on the unit will turn off.
2013/8/7 15:42:31