Advertisement
Connection camera with Pantilter
1. System connection
system cable
Camera movement (self-motion)
Initial Movement
Suppling power on system, pantilter moves
toward the end of left side and then returns
to the place where it used to be.
There is no initial movement if it is located
at the L-limit point when power is supplied.
2, Power connection
DV12V
220V
Connect the AC220V~DC12V power supply with
Pantilter.
(Connect this product only to an 220V, 60Hz outlet.
In the case of using 110V, please use an optional
booster.)
2
lnitial movement
4
1
Advertisement
