Canon MG7500 series Online Manual page 448

Hide thumbs Also See for MG7500 series:

Table of Contents

• When the application software specifies an input profile, the input profile setting of the printer

driver becomes invalid.

• When no input ICC profiles are installed on your computer, Adobe RGB (1998) will not be

5. Select the rendering intent

Select the coloring adjustment method in Rendering Intent.

• Saturation

This method reproduces images even more vividly than the Perceptual method.

• Perceptual

This method reproduces images by focusing on color tints that most people prefer. Select this

method to print photos.

• Relative Colorimetric

When image data is converted to the color space of the printer, this method converts the image

data so the color reproduction approximates the shared color regions. Select this method to print

image data with colors that are close to the original colors.

The white spots are reproduced as white spots (background color) on the paper.

• Absolute Colorimetric

This method uses the white spot definitions in the input and output ICC profiles to convert the

Although the color and color balance of the white spots change, you may not be able to get the

desired output results because of the profile combination.

• Depending on the media type, you may obtain the same print results even when you change

the Rendering Intent setting.

• When Windows XP SP2 or Windows XP SP3 is used, this function is disabled.

6. Set the other items

If necessary, click Color Adjustment tab, and adjust Cyan, Magenta, Yellow, Brightness, Intensity,

and Contrast settings, and then click OK.

7. Complete the setup

Click OK on the Main tab.

When you execute print, the printer uses the color space of the image data.

Table of Contents

Troubleshooting