Table of Contents
Advertisement
To view the status of the main unit's signal with the
radio-controlled clock signals, look for the
shown in the CLOCK & ALARM Display area. It indicates
2 factors:
•
Connection between the main unit and the sensor
(
)
•
RF signal reception (
How these signals work together:
ICON
MEANING
The unit has contact with the sensor
and has synchronized the time.
The unit has contact with the sensor
b u t t h e t i m e h a s n o t b e e n
synchronized.
The unit has lost contact with the
remote sensor but the time is
synchronized.
The unit has lost contact with the
remote sensor and the time is not
synchronized.
The unit cannot reach the remote
sensor.
AWS899_EN_R13
icon
)
9
9
NOTE To force a manual search for RF clock reception,
press and hold
TEMP / HYGRO SEARCH on the main
unit
for 2 seconds.
TURN RADIO RECEPTION ON / OFF
When you are in the CLOCK & ALARM Display you
can turn the reception on or off.
To turn the radio reception ON:
Press and hold UP for 2 seconds.
To turn the radio reception OFF:
Press and hold DOWN for 2 seconds.
Alternatively, you can turn it ON / OFF in the CLOCK
Setting Mode (see relevant section).
HOW TO CHANGE SETTINGS
All settings and display options for this product are
accessible from the
Main Menu.
3/7/05, 5:36 PM
Advertisement
Table of Contents
