Turn Radio-Controlled Clock On / Off; Set Clock; Switch Clock Display - Oregon Scientific BAR826HG User Manual

NOTE To force a manual search for RF clock
reception, press and hold SEARCH on the sensor
(RTGR328N) for 2 seconds.

TURN RADIO-CONTROLLED CLOCK ON / OFF

If you wish to manually set the clock, you must first
disable the radio-controlled feature. To do this, navigate
to the Clock / Alarm Area. Then, press and hold
the main unit for 2 seconds. To enable it, navigate to the
Clock / Alarm Area, then press and hold
RF clock enabled:
RF clock disabled:

SET CLOCK

You only need to do this if you have disabled the radio-
controlled clock, or if you are too far from a RF signal.
P/N:086-003808-011 REV1
13/162
BAR826HG_UM_EN.P65
1. Press MODE to navigate to the Clock Area.
show next to the Area.
2. Press and hold MODE for 2 seconds.
3. Select the time zone offset hour (+ / -23 hours), 12 /
24 hour format, hour, minute, year, date / month
format, month, date and display language.
4. Press
on
5. Press MODE to confirm.
for 2 seconds.
NOTE
French, (D) German, (I) Italian, and (S) Spanish. The
language you select determines the weekday display.

SWITCH CLOCK DISPLAY

Press MODE to navigate to the Clock Area.
next to the Area.
Press
• Clock with seconds
• Clock with day
• Clock with time-zone offset
• Calendar
12
12
or to change the setting.
The language options are (E) English, (F)
or to toggle between:
2005.3.8, 11:21 AM
will
will show