Table of Contents
Advertisement
CURRENT THERMO-HYGRO DISPLAY
Press CHANNEL to switch between 5 outdoor
channels. A current trend corresponding to the selected
channel will be displayed.
AUTO SCAN FUNCTION
When enabled, the thermo-hygro display for each
channel will be displayed for 4 seconds before changing
to the next channel.
To start auto scan, press and hold CHANNEL until you hear
a beep (press CHANNEL again to exit auto scan mode).
COMFORT ZONE
The indoor and outdoor comfort zones are always
shown, they display the relationship between
temperature and humidity.
ZONE
TEMPERATURE
Any
20 - 25 ° C
(68 - 77 ° F)
Any
AWS899_EN_R13
PRESSURE & UV INDEX DISPLAY
This product tracks barometric pressure changes over
the past 24 hours to provide a weather forecast. And if
you purchase the optional UV sensor, it will also record
the past 10 hours UV measurements.
To access the displays below, select the PRESSURE
& UV INDEX Display from the Main Menu.
NOTE On the bottom of the Baro and UVI bar charts
-1
means 1 hour ago, -6 means 6 hours ago etc.
To display current and past readings, press UP and
RELATIVE
DOWN.
HUMIDITY
To toggle between the Baro and UVI displays, press
>70%
CHANNEL.
If the main unit finds no UV sensor, the UV icon
will be turned off and the UVI value will show [--].
40 - 70%
<40%
18
18
3/7/05, 5:36 PM
Advertisement
Table of Contents
